If you don't see the above menu, update to
|
 |
| CARTRIDGE HEATERS - HIGH WATT DENSITY WITH TC |
|
| Any type of ULTRAMAX heater can be manufactured with a built-in thermocouple. Models in stock are with J-type thermocouple in position UTC type 2. |
| TYPE OF THERMOCOUPLE |
TEMPERATURE
RANGE |
| CODE |
POSITIVE |
COLOR |
NEGATIVE |
COLOR |
| J |
IRON |
RED |
CONSTANTAN |
BLUE |
-20 + 750ｺC |
| K |
CHROMEL |
RED |
ALUMEL |
GREEN |
-20 + 1250ｺC | |
|
Grounded to a special bottom disk. Guarantees excellent accuracy of the temperature and quick response. Widely used in injection systems for plastic materials. |
 |
|
Insulated in proximity to the bottom disk. Suitable for avoiding disturbances to very sensitive equipment. This type is used for the models in stock (see sizes). |
 |
|
Grounded to the metal sheath within a 12 mm cold section, located at the center of the heater. Guarantees excellent accuracy of the temperature and quick response. It cannot be used in cartridges with a diameter below 10mm. |
 |
|
Insulated at center of the heater. It provides the heater's temperature allowing the evaluation of heat exchange for a better use of both heater and energy. |
 | | |
|
| |
|
|
